數控機床幾何誤差論文的參考文獻

時間：2025-10-15 13:10:38 數控畢業論文

數控機床幾何誤差論文的參考文獻

　　參考文獻

數控機床幾何誤差論文的參考文獻

　　[1]

　　倪軍.數控機床誤差補償研究的回顧與展望[J].中國機械工程,1997,8(1):29~32.

　　[2]

　　Ramesh R, Mannan M A, Poo A N. Error compensation in machine tools — a review part I: geometric, cutting-force induced and fixture-dependent errors. International Journal of Machine Tools & Manufacture,2000, 40: 1235~1256.

　　[3]

　　J. Ni, Study on online identification and forecasting compensatory control of volumetric errors for multiple axis machine tools. PhD dissertation, University of Wisconsin-Madison, 1987.

　　[4]

　　Ramesh R, Mannan M A, Poo A N. Error compensation in machine tools — a review Part II: thermal errors. International Journal of Machine Tools & Manufacture,2000, 40:1257~1284.

　　[5]

　　Leete D J. Automatic compensation of alignment error in machine tools. International Journal of Machine Tool Design and Research,1961,1:293~324.

　　[6]

　　Hocken R, Simpson, A.J., et at. Three dimensional metrology. Annals of the CIRP, 1977,26(2): 403~408.

　　[7]

　　Zhang G, Veale R, Charlton T, Borchardt B, Hocken R. Error compensation of coordinate measuring machines. Annals of the CIRP, 1985,34 (1): 445~448 .

　　[8]

　　Schultschik R. The components of the volumetric accuracy. Annals of the CIRP ,1977,25(1):223~228.

　　[9]

　　Kiridena V, Ferrira P. Kinematic modeling of quasi-static errors of three-axis machine centers. Int. J. Mach. Tools Manufact.,1994,34(1):85~100.

　　[10]

　　Ni J. and S. M. Wu. An on-line measurement technique for machine volumetric error compensation. Journal of engineering for industry, 1993, 115: 85~92.

　　[11]

　　Chen J S, Yuan J, Ni J, Wu S M. Real-time compensation for time-variant volumetric errors on a machining center, Transactions of the ASME, journal of Engineering Industry,1993, 115:472~479.

　　[12]

　　Eung-Suk Lee,Suk-Hwan Suh and Jin-Wook Shon. A comprehensive method for calibration of volumetric positioning accuracy of cnc-machines. Advanced manufacturing technology, 1998,14(1): 43~49.

　　[13]

　　Dufour P, Groppetti R. Computer aided accuracy improvement in larger NC machine tools. M.T.D.R. Conference Proceedings,1988,22:611~618.

　　[14]

　　A.C.Okafor, Yalcin M.Ertekin. Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics. International Journal of Machine Tools and Manufacturing, 2000, 40:1199~1213.

　　[15]

　　Hooman Tajbakhsh, Zainul Abadin and Placid M. Ferreira. L∞ Parameter estimates for volumetric error in models of machine tools. Precision Engineering, 1997, 20 :179~187.

　　[16]

　　Chen Guiquan. Rapid volumetric error mapping and compensation for a three-axis machine center. Ph.D. thesis, Michigen University, USA, 2000.

　　[17]

　　Christopher D. Mize and John C. Ziegert. Durability evaluation of software error correction on a machine center. International Journal of Machine Tools and Manufacturing, 2000, 40:1527~1534.

　　[18]

　　李書和.數控機床誤差補償的研究[D]. 天津：天津大學,1996.

【數控機床幾何誤差論文的參考文獻】相關文章：

青春幾何作文10-07